Intumescent Pipe Collar
Use discount code (new2) for 5% off at checkout
2 Hour Rated
Use discount code (new4) for 5% off at checkout
4 Hour Rated
A steel collar internally lined with intumescent material that fits around plastic pipe work. The collar is hinged for ease of fit and secured with a clip fastener. Attachment to the wall or underside of the floor slab is by 6mm anchors fixing through integral steel lugs.
Suitable for use where plastic pipes pass through both walls or floor slabs. In a fire the intumescent expands and closes the hole left by the collapsing pipe, so retaining the structures integrity.
Ratings available 2 and 4 hours.
• Cost effective
• Easy to install on initial build or retro - fitting
• Available in wide range of sizes
• Finished in red for easy identification
Undo Clip and place collar around the pipe, close firmly by shutting the clip. Slide the collar along the pipe to form a seal with the wall or slab.
Intumescent Mastic should be used as gasket material to take up any imperfections between the collar flange and the wall or floor slab. Preferred fixings should be by 6mm anchors or in the case of studded walls/plasterboard ceilings use cavity fixings.
BS: 476 Part 20-23 - BSEN 1363-1: 2012 - BSEN 1366-3: 2009